Overview of all I/O modules
esd offers a wide range of compact stand-alone I/O modules for CANopen and EtherCAT. The modules of the CAN-CBX series offer the possibility of easy mounting in the DIN rail due to the InRailBus. All CANopen modules operate according to CANopen profiles in compliance with the CiA® specification CiA 301.
With the help of the button "Add to watchlist" you can save articles on your watchlist.
Afterwards, you can request your saved watch list as a quotation via a contact form.
Categories
Formfactors
Protocols
Supported operating systems
Interfaces
Features
- Bus-Mastering (DMA-Support) (1)
- CiA 301 compliant (13)
- CiA 401 profile (14)
- CiA 404 profile (1)
- EtherCAT Slave capable (1)
- galvanically isolated (19)
I/O Types
VME-DIO32-C
V.1607.06I/O card with 32 digital, opto-isolated channels for operation in the VMEbus. Compatible with the P2 assignment and the VME interface of the VDOT-32.
CPCI-DIO1616/2
I.2309.04CompactPCI interface card, 16 electrically isolated outputs 24V/0.5A, 16 electrically isolated inputs 24V, Drivers for various Operating Systems to be ordered separately
CAN-CBX-DIO8/2
C.3010.04CANopen module with 8 digital channels with 24V/1A each, each channel can be configured independently as an input or output. CANopen according to CiA 301 and CiA 401 Device Profile for Generic I/O Modules. Connectors for wire end ferrules included in the scope of delivery.
CAN-CBX-REL4/2
C.3012.04CANopen module with 4 relay channels, designed as 2x make contact and 2x changeover contact for switching voltages up to max. 250VAC/125VDC and switching currents up to max. 8A. CANopen according to CiA 301 and CiA 401 Device Profile for Generic I/O Modules. Connectors for wire end ferrules included in the scope of delivery.
ECX-DIO8
E.3010.02EtherCAT IO module with 8 digital channels, 24V/500mA, each IO programmable as input or output seperately
VME-DIO32-L
V.1607.05I/O board with 32 digital, opto-isolated channels for operation in the VMEbus. Successor and compatible with the VME-DPIO32/53140.
AMC-ADIO24-HD50
U.1001.0224x Dig.I/O, 8x AIN, 2x AOUT, 4 I/O RS485, Single, Mid 4TE, HD50 connector
CAN-CBM-AI4
C.2831.02CANopen module, 4 analog inputs, 0...10V / 0...20mA, 12 Bit resolution, CAN interface ISO11898-2 electrical isolated
CAN-CBM-AI410
C.2835.02CAN-CBM-AI410 CANbloc-Mini-Module 4 analog inputs, 0..10 V, 10 Bit resolution, CAN Interface ISO-11898-2, electrically isolated, CANopen profile CiA401
CAN-CBM-AI410-T
C.2835.044x10 Bit AnalogIn, CANbloc-Mini-Modul (CANopen), 4 analog inputs, 0..10 V, 10 bit resolution, CAN high speed interface, ISO-11898-2, electrically isolated, Extended temperature range: -20C..+85C
CAN-CBM-Clock-Batterie
C.2836.03CAN-CBM-Clock-Batterie CAN-CBM-Clock Clock-Distribution DCF/GPS CANbloc-Mini-Modul (CANopen) - for clock distribution on CAN-Bus - inputsignal via DCF (see list of supported receiver, RS232) or - Inputsignal via GPS (NMEA, RS232) - backup through local RealTime-Clock (RTC) with batterie - CAN interface ISO-11898 with galvanic seperation up to 1 MB/s CAN-CBM-Clock - Batterie SVHC information acc. to article 33 of regulation (EC) 1907/2006 (REACH): This products is equipped with a lithium battery that contains the SVHC substance 1,2-dimethoxyethane, ethylene glycol dimethyl ether (EGDME) (CAS-no. 110-71-4) in a concentration of more than 0.1% w/w (related to the mass of the battery).
CAN-CBM-COM1 CANlayer2-to-RS232
C.2841.02CAN-CBM-COM1 CAN-to-RS232 CANbloc-Mini module for one serial interface with RS232 based on C505C CAN-Layer-2 with esd-700 protocol. CAN Interface ISO11898 with highspeed optocoupler.