Overview of all products

Here you can see all our order items. Use the extensive filter options to find the suitable product for you.

Overview of the technologies used

With the help of the button "Add to watchlist" you can save articles on your watchlist.
Afterwards, you can request your saved watch list as a quotation via a contact form.

Please feel free to contact us

If you have any questions or would like more information, please do not hesitate to contact our sales team.

Contact us
Telephone: +49 (0) 511 37298-0
E-Mail:        sales@esd.eu

Selected filters
CAN: 1
Remove all filter
Categories
Formfactors
Protocols
Supported operating systems
Interfaces
Features
I/O Types
85 Order items
CAN-CBX-THERMO

CAN-CBX-THERMO

C.3034.02

CANopen module with 4 independent, galvanically isolated channels with 24-bit Sigma-Delta ADC for high-precision temperature and voltage measurements. Suitable for thermocouples of types J, K, B, E, N, R, S or T as well as integrated cold junction compensation. CANopen according to CiA 301 and CiA 404 Device Profile Measuring Devices. Connector plug for wire end ferrules included in the scope of delivery.

CAN-CPCI/331-1 1xCAN-2.0A/B

CAN-CPCI/331-1 1xCAN-2.0A/B

C.2027.02

active CompactPCI-CAN interface board, 3U/4HP CompactPCI board, 1x CAN interface preset to CAN 2.0 A (switchable to 2.0 B), physical layer according to ISO 11898, electrically isolated, drivers, tools and documentation for Windows & Linux on CD-ROM

CAN-DP

CAN-DP

C.2905.02

Gateway CAN/Profibus-DP-Slave, CPU PPC405, 133MHz, DRAM, Flash, 1x CAN controller SJA1000, CAN physial layer according ISO-11898 with optical isolation up to 1 MBit/s, CAN 2.0A/B, DP physical layer: RS-485 with optical isolation up to 12 MBit/s; manual and GSD file on CD-ROM; hat rail mounted device

CAN-DP/2

CAN-DP/2

C.2907.02

Gateway CAN to Profibus-DP slave, Operating voltage: typ. 24VDC, ARM Cortex M3 microcontroller with integrated CAN-Controller, ISO 11898-1, CAN physical layer ISO 11898-2, up to 1 MBit/s, galv. isolation, VPC3 Profibus-DP slave controller, DP physical layer: RS-485, up to 12 MBit/s, galv. isolation; Firmware with gateway function, Manual and GSD file on CD-ROM

CAN-EtherCAT

CAN-EtherCAT

C.2922.02

EtherCAT to CAN gateway for DIN rail mounting. Can be integrated as EtherCAT slave according to ETG modular device profile No. 5000. Galvanically isolated CAN interface according to ISO-11898 with up to 1 MBit/s. The CAN EtherCAT is configured via the EtherCAT master and standard EtherCAT configuration tools. Also usable as Ethernet switch port device for integration of Ethernet into EtherCAT.

CAN-ISA/200 1xCAN2.0A

CAN-ISA/200 1xCAN2.0A

C.2011.02

Passive ISA to CAN interface board, CAN controller SJA1000, 1 CAN 2.0A interface, physical layer according to ISO 11898, electrically isolated; Attention: the passive interface can result to restrictions for the achievable effective bitrate depending on the performance of the host CPU, Drivers, tools and documentation for Windows & Linux on CD-ROM

CAN-ISA/331-1 1xCAN

CAN-ISA/331-1 1xCAN

C.2010.02

Intelligent ISA-CAN interface board, MC 68331 CAN kernel with FIFO connection, 1 CAN 2.0A interface, Physical layer according to ISO 11898, electrically isolated, Data rate up to 1 Mbit/s, integrated firmware Drivers, tools and documentation for Windows & Linux

CAN-Mini/402-DSUB9-15cm

CAN-Mini/402-DSUB9-15cm

C.2044.10

DSUB9 adapter for CAN-PCIeMini/402 and CAN-M.2/402 boards with 150mm connection cable. The CAN terminating resistor can be switched via a jumper.

CAN-Mini/402-DSUB9-30cm

CAN-Mini/402-DSUB9-30cm

C.2044.11

DSUB9 adapter for CAN-PCIeMini/402 and CAN-M.2/402 boards with 300mm connection cable. The CAN terminating resistor can be switched via a jumper.

CAN-Mini/402-DSUB9-ISOL

CAN-Mini/402-DSUB9-ISOL

C.2054.10

The DSUB9 adapter is the recommended accessory for the CAN-PCIeMiniHS/402 and CAN-M.2/402-4-FD and has an galvanically isolated CAN interface as a DSUB9 plug in accordance with CiA 106. The CAN terminating resistor can be activated via a jumper on the adapter if required. A separate adapter is required for each CAN channel.

Do you have specific requirements for which there is no standard product?

We will be happy to help you. esd electronics has over 30 years of experience in the development of complex electronics. We have highly qualified development teams that are happy to take on your task and implement the specifications in hardware and software.

Learn here about the advantages of customized boards and systems.

Customized boards and systems