Extraction of esd CAN driver Version > 3.0.0 21.05.2008 ------------------------------------------------------------------------------ This document is just an excerpt from the README contained within the driver archive. This is meant to show you the extraction of the driver components from their archive. Please have a look into the README contained within the archive for further instructions on installation and usage. Unpack the archive: A1) Unzip the archive: "unzip esdcan-crd-os-arch-ver-ext.zip" with crd = card-id (e.g.: crd=pci200 or crd=cpci405 ...) os = host-operation-system (e.g.: os=linux-2.4.x) arch = host-architecture (e.g.: arch=x86 or arch=x86_64) ver = driver version (e.g.: ver=3.7.2) ext = extension (applicable to certain cards only, e.g.: ext=gcc2) You'll be prompted for a password. Password: esdCAN2007 Resulting file: "esdcan-crd-os-arch-ver-ext.tar" A2) Untar the driver directory: "tar -xvf esdcan-crd-os-arch-ver-ext.tar" with crd = card-id (e.g.: crd=pci200 or crd=cpci405 ...) os = host-operation-system (e.g.: os=linux-2.4.x) arch = host-architecture (e.g.: arch=x86 or arch=x86_64) ver = driver version (e.g.: ver=3.7.2) ext = extension (applicable to certain cards only, e.g.: ext=gcc2) You'll end up with a directory named as the archive. Alternatively the above can be accomplished in a single step: B) Unzip and untar in a single step: "unzip -p esdcan-crd-os-arch-ver-ext.zip | tar -xv" You'll be prompted for a password. Password: esdCAN2007