CompactPCI Board with FPGA for 4 CAN FD Interfaces via DSUB25
-
4 CAN FD interfaces according to ISO 11898-2
-
CAN FD bit rate up to 8 Mbit/s
-
Bus Mastering and local data management by FPGA
-
PCI bus conform to PCI Local Bus Specification 3.0
-
Selectable CAN termination on board
-
Supports MSI (Message Signaled Interrupts)
-
Optional extended temperature range: -40° C … +85° C
Wide Range of Operating System Support and Advanced CAN Diagnostic
-
Software drivers for Windows® and Linux® included free of charge of CPCI-CAN/402-4
-
Optional CAN layer 2 software drivers for real-time operating systems
-
CANopen®, J1939 and ARINC 825 protocol libraries are available
-
ISO 16845:2004 certified esd Advanced CAN Core (esdACC)
-
High resolution hardware timestamps
Modern Transceiver Technology
esd Advanced CAN Core (esdACC) technology offers highest CAN performance and diagnostic
Customization on Request
• IRIG-B input
• Error simulation support
• All signals via Rear I/O (P3)
• 2x CAN FD via DSUB9
Free drivers for Windows and Linux included
The product is offered with drivers for Windows and Linux, which can be downloaded free of charge.
In addition to these operating systems, various other (real-time) operating systems are also supported. Detailed information can be found in the description of our order items and, if applicable, in the accessories at the bottom of this page. For more detailed information about the availability of drivers for your operating system, please contact our sales team.
Free CAN tools for fast setup and diagnosis of CAN networks
Our CAN tools for Windows, which are available free of charge in the CAN SDK, significantly support the user in quickly setting up and easily diagnosing CAN, CAN FD and CANopen networks. The possibility of data logging helps the user to record the data traffic for later analysis and to process it further as a CSV file.
Wide range of hardware designs of the 402 family
The CAN 402 family is a CAN board family developed for the PCI Express and PCI bus. The CAN 402 family has variants with up to four galvanically isolated CAN or CAN FD interfaces according to ISO 11898-2 and is implemented with the esdACC (esd Advanced CAN Core) certified according to ISO 16845:2004.
The CAN or CAN FD interfaces are accessible via DSUB9 connectors for each channel (some variants require an additional adapter).
The cards are available in many designs, including low-profile versions for PCI and PCI Express as well as Mini-PCI Express and in M.2 format. In addition to these formats, which are increasingly intended for standard PCs, designs for PMC, XMC, CPCI and many other designs have also been realized. The advantage of the uniform design is the uniform hardware core. This means that applications can be transferred from desktop PC systems to e.g. CPCI systems without any porting effort.
CAN Data Management
The CAN(-FD) interfaces are controlled by the esdACC (esd Advanced CAN Core) developed by esd and certified according to ISO 16845:2004, which is implemented in an FPGA.
The design includes a bus mastering unit (first-party DMA) to exchange the CAN data.
This allows the CAN interface to initiate write cycles to the CPU RAM independently of the host system's CPU or DMA controller. This reduces the CPU load of the host system and the overall system latency.
Thanks to the support of MSI (Message Signaled Interrupts), it is possible to use the CAN interface in hypervisor environments, among others.
In addition, the module also supports high-resolution 64-bit hardware timestamps to enable highly accurate reception and transmission of CAN messages.
NTCAN API and available software stacks
The NTCAN API is a cross-platform software communication interface for CAN and CAN FD hardware. The well-structured API allows easy integration into any application. The functionality and versatility of the implementation provide all necessary mechanisms to control, configure and monitor CAN and CAN FD networks. In addition to the free version for Windows and Linux, the NTCAN API is also available for many real-time operating systems such as QNX®, RTX® or VxWorks® for a license fee.
Many sophisticated functions make the API ideally suited for use in conjunction with higher CAN / CAN FD based protocols. For many common protocols corresponding implementations are already available from esd. These higher layer protocols for Classical CAN, which are available for numerous operating systems, include:
Do you have special requirements regarding the product?
We are happy to provide you with a customer-specific option or adjustment to our products when purchasing appropiate quantities. Please contact our sales team for detailed information.
CPCI-CAN/402-4 Successor with CAN FD
The CPCI-CAN/402-4 (I.2332.08) is in life cycle stage "end-of-life" and is not recommended for new designs. (It can still be used in existing systems, e.g. if the drivers shall not be reinstalled.)
Use the successor CPCI-CAN/402-4-FD for new projects. It comes with a more powerful FPGA and supports CAN FD.
Furthermore, it can also be used in Classical CAN applications, because it is fully backwards compatible with CAN.
Documentation
-
Potential Interoperability Problems of CAN/402-Boards with Windows or Linux Application Note (EN) 194 KB
With the help of the button "Add to watchlist" you can save articles on your watchlist.
Afterwards, you can request your saved watch list as a quotation via a contact form.
Hardware
3U/4HP CompactPCI classic (CPCI 2.0) Intercface Card with 4x CAN FD at front via 25 pole DSUB and with esd Advanced CAN Core (esdACC) incl. Driver CD for Windows/Linux
- Bus-Mastering (DMA-Support)
- esd Advanced CAN Controller (esdACC)
- galvanically isolated
- HW-Timestamp capable
- MSI-IRQ capable
- CAN
- CAN FD
- PCI
- Linux
- On Time RTOS-32
- QNX6/7
- RTX
- RTX64
- VxWorks
- Windows 7/8/10/11
- TenAsys INtime 6/7
- ARINC825
- CAN FD-Layer 2
- CAN-Layer 2
- CANopen
- J1939
3U/4HP CompactPCI classic (CPCI 2.0) Intercface Card with 4x CAN FD at front via 25 pole DSUB and with esd Advanced CAN Core (esdACC) for advanced temperature range -40°C up to +85°C; coated incl. Driver CD for Windows/Linux
- Bus-Mastering (DMA-Support)
- Extended temperature range
- esd Advanced CAN Controller (esdACC)
- galvanically isolated
- HW-Timestamp capable
- MSI-IRQ capable
- CAN
- CAN FD
- PCI
- Linux
- On Time RTOS-32
- QNX6/7
- RTX
- RTX64
- VxWorks
- Windows 7/8/10/11
- TenAsys INtime 6/7
- ARINC825
- CAN FD-Layer 2
- CAN-Layer 2
- CANopen
- J1939
Hardware-Accessories
4x CAN-, 1x IrigB-Cable, 1x DSUB25 to 4x DSUB9(plug) and 1x DSUB9(socket), Length: 0,5 m
4x CAN-Cable, 1x DSUB25 to 4x DSUB9(plug), Length: 0,5 m
Software-Accessories
Single user runtime license for CANopen Software Stack for Windows and Linux in conection with esd CAN hardware and NTCAN API. Includes CANopen Manager and Slave as dll's/lib's in one package. Delivery as license sticker and CD (LCD) with documentation.
- CiA 301 compliant
- Runtime license
- Software Stack
- Linux
- Windows 7/8/10/11
- CANopen
Single user runtime license for CANopen Software Stack for RTX/RTX64 in connection with esd CAN hardware and NTCAN API. Includes realtime driver, CANopen Manager and Slave. Delivery as license sticker and CD (LCD) with documentation.
- CiA 301 compliant
- Runtime license
- Software Stack
- RTX
- RTX64
- CANopen
Single user runtime license for CANopen Software Stack for QNX in connection with esd CAN hardware and NTCAN API. Includes realtime driver, CANopen Manager and Slave. Delivery as license sticker and CD (LCD) with documentation.
- CiA 301 compliant
- Runtime license
- Software Stack
- QNX4
- QNX6/7
- CANopen
Single user runtime license for CANopen Software Stack for VxWorks in connection with esd CAN hardware and NTCAN API. Includes realtime driver, CANopen Manager and Slave. Delivery as license sticker and CD (LCD) with documentation.
- CiA 301 compliant
- Runtime license
- Software Stack
- VxWorks
- CANopen
object licence and CD-ROM for QNX 4.x, 6.x and 7.x for esd PC-CAN-Boards including CD-ROM, with CAN drivers, demo programs and tools, documentation and manuals
- Runtime license
- QNX6/7
- CAN FD-Layer 2
- CAN-Layer 2
object licence and CD-ROM for RTX for esd PC-CAN-Boards including CD-ROM, with CAN drivers, demo programs and tools, documentation and manuals
- Runtime license
- RTX
- RTX64
- CAN FD-Layer 2
- CAN-Layer 2
object licence and CD-ROM for VxWorks 5.x and 6.x for esd PC-CAN-Boards including CD-ROM, with CAN drivers, demo programs and tools, documentation and manuals
- Runtime license
- VxWorks
- CAN FD-Layer 2
- CAN-Layer 2
Object license and CD for INtime 6 and 7 for esd PC-CAN-Boards including CD-ROM with CAN drivers, demo programs and tools, documentation and manuals
- Runtime license
- TenAsys INtime 6/7
- CAN FD-Layer 2
- CAN-Layer 2
Single-user runtime license for J1939 Software Stack and J1939 Device Simulator & Monitor for use with esd CAN hardware and NTCAN API. Including protocol interpreter plugin for CANreal for decoding and displaying PGNs. Delivered as Windows object code for easy integration into a system.
- Runtime license
- Software Stack
- Windows 7/8/10/11
- J1939
Single-user runtime license for J1939 Software Stack for use with esd CAN hardware and NTCAN API. Provided as Linux object code for easy integration into a system.
- Runtime license
- Software Stack
- Linux
- J1939
Single-user runtime license for J1939 Software Stack for use with esd CAN hardware and NTCAN API. Provided as RTX object code for easy integration into a system.
- Runtime license
- Software Stack
- RTX
- RTX64
- J1939
ARINC 825 object licence for Windows, Linux and LabVIEW (Windows), Usable with all esdACC based CAN interfaces, object licence, ARINC 825 dll's/lib's, documentation, includes CAN-Driver object licence (C.1101.02), manuals and CAN-Tools
- Linux
- Windows 7/8/10/11
- ARINC825
ARINC825-LCD RTX/RTX64 Objekt Licence and CD usable with all esdACC based CAN interfaces includes C.1101.35 CAN-DRV-LCD RTX/RTX64 Objekt Licence and CD
- RTX
- ARINC825
Licence and CD for QNX usable with all esdACC based CAN interfaces, includes object licence, ARINC 825 dll's/lib's, documentation, includes CAN-Driver object licence (C.1101.32)
- QNX6/7
- ARINC825
licence and cd for VxWorks usable with all esd ACC based CAN interfaces, includes object licence, ARINC 825 dll's/lib's, documentation, includes CAN-Driver object licence (C.1101.55), manuals and CAN-Tools
- VxWorks
- ARINC825
