- Change over contacts: 2
Normally open contacts: 2
Switching voltage: max. 250 VAC, 125 VDC
Switching current: max. 8 A (AC and DC)
Max. resistive load: 2000 VA / 240 W
Max. inductive load: 875 VA / 170 W
CANopen profiles acc. to CiA® specification CiA 301 and CiA 401
Electrical isolation of relay outputs
InRailBus technology combines high ease of use and proven reliability
DIN-EN carrier rail mounting (TS 35)
The CAN-CBX-REL4 is equipped with 4 relays which are electrically isolated from each other. Therefore various voltages can be applied to the CAN-CBX-REL4 module simultaneously.
The CAN interface is designed according to ISO11898-2 high-speed layer with electrical isolation and supports bit rates up to 1 Mbit/s. The CANopen-node number and the CAN bit rate can be easily set via coding switches. Four LEDs indicate the module and CANopen node status, four additional LEDs indicate the status of the relays.
The power supply and the CAN bus signals can be supplied via the InRailBus connector (TBUS connector) integrated in the mounting rail. In this way, a minimum of cabling of the individual modules is achieved. All esd CBX modules are compatible with each other and can be plugged onto the bus as required. It is also possible to disconnect individual modules from the InRailBus without interrupting the bus signals or the power supply.
The CAN-CBX-REL4 comes with CANopen firmware according to CiA 301 and and with a CANopen-I/O profile according to CiA 401.
CANbloc-X-Module für CANopen 2 Relais with 2x changeover, 60VA, 2 Relais with 2x close, 60VA, max. switching voltage 240VAC, In-Rail-Bus
- CiA 301 compliant
- CiA 401 profile
- galvanically isolated
- CANopen Device
- CAN-Layer 2