esd extends CompactPCI Series by two CompactPCI Serial Boards

2018-04-12

With another two interface boards, the CPCIserial-CAN/402-4-FD and the CPCIserial-CAN/402-2, esd electronics extends its CPCI series of CAN boards according to PICMG 2.0 CompactPCI.

Both boards are controlled by the high performance esd Advanced CAN Core, "esdACC" implemented in an Altera-FPGA. With the esdACC the boards support Bus Mastering and local data management to transfer data to the host memory (regardless of the CPU or the system's DMA controller). This in turn results in a reduction of overall latency on servicing I/O transactions particularly at higher data rates. Moreover it reduces host CPU load. The components support MSI (Message Signaled Interrupts) and are equipped with an adjustable internal CAN termination.

Well-established the esd NTCAN API supports many different operating systems, such as Windows® and Linux® (included free of charge) or QNX, VxWorks, RTX, and On-Time-RTOS-32. The migration from present esd CompactPCI classic boards to CompactPCI serial can be achieved easily.

CompactPCI Serial (PCIe) Board with four CAN FD-Interfaces

The CPCIserial-CAN/402-4-FD has four high speed CAN FD interfaces according to ISO 11898-2 with a transmission rate of up to 5 Mbit/s. The four CAN FD interfaces are accessible at the front panel via a DSUB25 plug.

CompactPCI Serial Board with four CAN FD Interfaces

  • High speed CAN FD interfaces acc. to ISO 11898-2, up to 5 Mbit/s
  • Bus Mastering and local data management by FPGA (esdACC)
  • PICMG CPCI-S.0 standard supporting high speed PCI Express® interface lines
  • Selectable CAN termination on board
  • Supports MSI (Message Signaled Interrupts)
  • All I/O signals via 25-pin DSUB in the front panel
  • CANopen, J1939 and ARINC 825 protocol libraries
  • Software drivers for Windows and Linux included free of charge
  • ISO 16845:2004 certified esd Advanced CAN Core (esdACC) technology
  • High resolution hardware timestamps

learn more

CompactPCI Serial (PCIe®) Board with two CAN-Interfaces

The CPCIserial-CAN/402-2 is available with two CAN interfaces according to ISO 11898-2 and transmission rates of up to 1 Mbit/s. Each CAN interface is connected via a DSUB9 connector at the front.

CompactPCI Serial Karte mit zwei CAN FD Schnittstellen

  • High speed CAN interfaces acc. to ISO 11898-2, bit rate up to 1 Mbit/s
  • Bus Mastering and local data management by FPGA (esdACC)
  • PICMG® CPCI-S.0 standard supporting high speed PCI Express® interface lines
  • Selectable CAN termination on board and cut-out in the front panel for jumper view
  • Support of MSI (Message Signaled Interrupts)
  • Software drivers for Windows and Linux included free of charge
  • CANopen®, J1939 and ARINC 825 protocol libraries
  • ISO 16845:2004 certified esd Advanced CAN Core (esdACC) technology
  • High resolution hardware timestamps

learn more

For further information on our products and technologies please do not hesitate to contact us either by phone +49 (0)511-372980 or by email at sales@esd.eu.
We look forward to hearing from you!

Tags: